If Your Hot Water System Fails: Quick Response Guide

Need Help? Hire Us Now!

Just how do you actually feel with regards to How to Troubleshoot and Repair an Electric Water Heater?



Many contemporary residences make use of an electric hot water heater for their furnace, because of its comfort and also simplicity of use. However, just like any other electric devices, problems may arise with its use, unexpectedly. It can be really irritating to get up to a cool shower as opposed to a warm one or having your bathroom with water that isn't hot enough or perhaps too hot. Whatever the instance might be, water heater problems can be quite aggravating. The good news is, we have actually made a list of feasible solutions to your hot water heater problems. There are a number of variables that might cause most of these issues, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the trouble is, getting it repaired should not present excessive of an issue if you comply with these steps:

Call A Specialist:


If after replacing all damaged parts and also resetting your temperature, the hot water heater still isn't working, you might need to speak to a professional plumber for a specialist opinion. The trouble with your heating unit could be that the hot and cold taps have been switched over or it might be undersized for the quantity of hot water required in your home. Whatever the case may be, a specialist plumber would aid fix the problem.

Examine Your Power Supply:


As fundamental as this may appear, it is very needed. Without ample power, your water heater will certainly not operate. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the problem, simply transform it on and off once again. Replace any type of broken or worn-out fuse. Check the device with power after these changes to see if it's now working.

Inspect Your Thermostat:


If your hot water heater still isn't functioning or the water coming out isn't hot enough, you might need to check the temperature level settings on your top thermostat. Make certain the circuit breaker is switched off before doing anything. Open up the accessibility panel as well as press the red switch for temperature level reset over the thermostat. This should help heat up the water. Turn the circuit breaker back on as well as inspect if the trouble has been settled.

Check the Heating Element in the Water Heater:


If it's not a power problem, then try looking into your heating element if it is still working. Examine each of your burner to ensure the problem isn't with any of them. If any of them is defective, change that part and after that inspect whether the warm water is back on.

Final thought


Water heater problems are not always significant. Many of them are due to minor concerns like a blown fuse or damaged burner. Changing the malfunctioning components must work. Nevertheless, if you are still not able to resolve the problem, give a call to your nearest plumber to come to get it dealt with.


What To Do If Your Hot Water Suddenly Stops Working


The water heater tripped the circuit breaker


The occasional power surge can sometimes cause your large appliances to trip their circuit breaker. Head to your electrical panel to see if the switch associated with your water heater needs to be reset


Your water heater’s fuel supply has been shut off.


If you own a gas or propane water heater, someone might have closed the gas valve. Without gas, your water heater can’t heat water. Ensure the valve is in the “open” position (parallel to the gas line, as opposed to perpendicular to it). If you smell gas (a “rotten egg” smell) or hear the hissing sound of a gas leak, evacuate your home at once, notify your utility company from a safe distance away, and contact a professional to repair your gas line.


The water heater’s pilot light is out.


Although newer water heaters no longer have pilot lights, it’s commonplace for older gas water heaters to have them. Typically, you can find instructions for relighting the pilot light somewhere on the side of the water heater tank, in the owner’s manual, or in online instructions from the manufacturer. Of course, you can always consult a qualified plumber regarding water heater pilot light issues as well.


There’s a problem with the water heater’s burner.


  • Wait for the burner to turn off. If you have no hot water, it’s probably off already. Once it’s off, set your water heater’s thermostat to 120°F.


  • Go to a faucet and turn on the hot water. Let it continue to run for a minute or so while you check on the burner.


  • Observe to see if the burner ignites. If it does, you can adjust the temperature as needed while the water still runs. However, the Consumer Product Safety Commission (CPSC) strongly recommends a temperature no higher than 120°F to prevent scalding.


  • If your burner does not ignite, there’s most likely a problem with the thermostat. You’ll need a plumbing professional to repair it.


  • The water heater’s capacity is too small.


    If you own a storage tank water heater, sometimes a couple of showers in a row can use up most of the hot water stored in the tank. Then, when it’s time for the next person to shower, they’ll run out of stored hot water partway through and then they'll experience water not getting hot. You have some options:


  • Wait longer before showering so the hot water can “fill up” again.


  • Upgrade to a water heater with a bigger tank.


  • Switch to an on-demand (or tankless) water heater.


  • Do You Have a Faulty Heating Element?


    Hot water is heated by one or more heating elements that are located at the bottom of the hot water heater. Due to sediment cover, these elements become less effective at heating water. Even without sediment buildup, heating elements can become damaged and inefficient after years of regular use.



    In the event that the hot water heater's heating element fails, the water will be lukewarm throughout the home. You can restore hot water to your home by contacting a plumber or hot water heater technician.

    https://www.albrightsmechanical.com/blog/2021/january/what-to-do-if-your-hot-water-suddenly-stops-work/


    No Hot Water — Water Heater Repair

    I'm certainly very enthusiastic about How to Troubleshoot and Repair an Electric Water Heater and I hope you liked the entire blog posting. Enjoyed our review? Please share it. Help other people check it out. Thank you for taking the time to read it.


    Go Services

    Leave a Reply

    Your email address will not be published. Required fields are marked *